cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 type unl, dc link and filter capacitors high capacitance, high current, board mount d 0.8 mm 12.7 0.8 mm 5.1 mm 2.54 0.8 mm 0.8 0.08 mm h* 0.5 mm h 0.5 mm * standard long pins: h = 7.6 mm 's' short pins: h =3.8 mm pins are tapered 1.27 - 1.14 mm constructed using a low-loss polypropylene f lm, the unl series o? ers high ripple current capabilities and high capacitance values making them ideal for electrolytic bank replacement and high ripple current applications. highlights advantages over electrolytics - exceptionally low esr - up to 10 times the ripple current - non-polar - higher voltage ratings - dry construction - no electrolyte - improved reliability specif cations capacitance range 4.7 to 100 f capacitance tolerance 10% (k) standard rated voltage 400 to 1500 vdc operating temperature range C55 oc to 105 oc* *full rated voltage at 85 oc - derate linearly to 50% rated at 105 oc maximum rms current check tables for values test voltage between terminals @ 25 oc 125% rated dc voltage for 60 s test voltage between terminals & case @ 25 oc 3 kvac @ 50/60 hz for 60 s life test 2,000 h @ 85 oc, 125% rated voltage life expectancy 60,000 h @ 70 oc, rated voltage rohs compliant dimensions construction details case material plastic ul94v-0 resin material dry resin ul94v-0 terminal material tin plated brass specif cations
cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 ratings unl 7 w20 k s Cf type voltage capacitance tolerance leads rohs unl 4 = 400 vdc w80 = 80f k = 10% s = short pins compliant 5 = 500vdc w100 = 100f blank = long pins 6 = 600 vdc w30 = 30f 7 = 750 vdc w50 = 50f 8 = 800 vdc w40 = 40f 9 = 900 vdc w13p5 = 13.5f 10 = 1000 vdc w10 = 10f 12 = 1200 vdc w7p5 = 7.5f 15 = 1500 vdc w4p7 = 4.7f *add s after k for short pins part numbering system type unl, dc link and filter capacitors high capacitance, high current, board mount note: other ratings, sizes and performance specifcations are available. contact us. catalog part number* cap (f) rated voltage (vdc) dia. d (mm) height h (mm) typical esr @ 100 khz (m) dv/dt (v/s) peak current (a) ripple current @ 100 khz 25 oc (arms) 50 oc (arms) 75 oc (arms) UNL4W30K-F 30.0 400 35 53.7 6.0 30 900 24.2 19.4 14.6 unl4w80k-f 80.0 400 50 63 5.0 25 2000 35.0 28.0 14.3 unl5w35k-f 35.0 500 35 53.7 8.0 26 910 22.0 18.2 13.0 unl5w100k-f 100.0 500 50 63 6.0 22 2200 31.8 25.4 13.2 unl6w30k-f 30.0 600 35 53.7 9.0 30 900 20.7 17.0 12.0 unl6w80k-f 80.0 600 50 63 6.5 25 2000 30.5 24.4 12.6 unl7w20k-f 20.0 750 35 53.7 10.0 37 740 19.0 16.0 9.9 unl7w50k-f 50.0 750 50 63 7.0 30 1500 29.4 23.5 12.0 unl8w15k-f 15.0 800 35 53.7 10.0 42 630 18.8 15.0 9.8 unl8w40k-f 40.0 800 50 63 7.5 35 1400 28.4 22.8 11.7 unl9w13p5k-f 13.5 900 35 53.7 10.5 43 580 18.0 14.5 9.6 unl9w35k-f 35.0 900 50 63 8.0 36 1260 27.5 22.0 11.3 unl10w10k-f 10.0 1000 35 53.7 12.0 50 500 17.5 13.7 9.0 unl10w25k-f 25.0 1000 50 63 8.5 40 1000 26.7 21.4 11.0 unl12w7p5k-f 7.5 1200 35 53.7 13.5 60 450 16.0 12.0 8.4 unl12w20k-f 20.0 1200 50 63 9.0 50 1000 26.0 20.7 10.7 unl15w4p7k-f 4.7 1500 35 53.7 15.0 72 338 15.0 11.5 7.8 unl15w13k-f 13.0 1500 50 63 10.0 60 780 24.6 19.7 10.1
cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 typical performance curves 0.8 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 100 1000 10000 100000 1000000 applied / rated voltage ratio (va/vr) expected lifetime (h) expected lifetime vs core temperature and applied dc voltage 50 oc 60 oc 70 oc 85 oc 0 5 10 15 20 25 10 100 1000 10000 100000 ripple current (arms) frequency (hz) ripple current ratings vs temperature and frequency unl6w30k - f 25 oc 50 oc 75 oc 85 oc 3 6 9 12 15 100 1000 10000 100000 esr (m ) frequency (hz) unl6w30k - f esr vs frequency and temperature 45 oc 25 oc 65oc 0 oc 85 oc - 20 oc - 40 oc type unl, dc link and filter capacitors high capacitance, high current, board mount
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information con - tained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guaran - tee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa - tion regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi - cated in such warnings, cautions and notes, or that other safety measures may not be required.
|
